• Company News Home>>News >>Company News
    Precautions for installation of servo planetary reducer

    Servo planetary reducer installation precautions, servo planetary reducer its small volume, high precision, high transmission rate, wide range of deceleration advantages, often as the main choice of the user reducer. Some manufacturers in the procurement back, in order to save installation costs, self-installation, due to the installation of illegal operation, resulting in servo planetary reducer output shaft broken, and to re-purchase, so that enterprises cause dead weight loss.
    1, before installation, the motor input shaft, positioning boss and servo planetary reducer connection parts of the anti-rust oil with gasoline or zinc sodium water wipe clean. The purpose is to ensure tightness and flexibility of connection and to prevent unnecessary wear and tear.
    2. Before installation, confirm whether the motor and reducer are in good condition, and strictly check whether the sizes of the parts connected with the motor and reducer match. Here are the sizes and coordination tolerances of the positioning boss of the motor, the input shaft and the reducer groove.
    3. Before the motor is connected with the reducer, the motor shaft keyway should be perpendicular to the tightening bolt. In order to ensure uniform force, screw the mounting bolts in any diagonal position first, but do not tighten it, and then screw the mounting bolts in the other two diagonal positions and tighten the four mounting bolts one by one.
    4. Connect the motor with the reducer naturally. When connecting, the output shaft of the servo planetary reducer should be consistent with the concentricity of the motor input shaft, and the outer flanges of the two are parallel. If the concentricity is not consistent, it will cause the motor shaft to break or the gear of the reducer to wear.
    5. Unscrew the screw on the dust hole outside the reducer flange, adjust the clamping ring of PCS system so that the side hole is aligned with the dust hole, and insert the inner hexagon and tighten it. After that, remove the motor shaft key.
    6. When installing, it is strictly prohibited to hit with a hammer to prevent excessive axial or radial force from damaging bearings or gears. Be sure to tighten the mounting bolts before tightening the force bolts.
    7. When installing the servo reducer to tighten the screw bolt, it is necessary to tighten the screw bolt, which cannot be loosened. When twisting, it must be fixed according to the fixed torque data.
    The above servo planetary reducer installation notes are introduced here, servo planetary reducer is suitable for lifting transportation, engineering machinery, metallurgy, mining, petrochemical, construction machinery, light industry textile, medical instruments, instruments and meters.

    彩神vAPP|彩神vAPP邀请码 | 大玩家| | | 彩神lll| | http://www.lege-art.com http://www.xrjs.org http://www.xinyunpay.com